MPN: SCC110030210

Spec Sheet

The Victron SmartSolar MPPT 100/30 is a 30A solar charge controller for 12V and 24V systems, built for remote telemetry, radio, and SCADA sites.

• Ultra-fast MPPT tracking, up to 98% efficiency, no cooling fan

• Accepts PV input up to 100V; auto-selects 12V or 24V

• Built-in Bluetooth for setup and monitoring through the VictronConnect app

• VE.Direct port for remote monitoring through a Victron GX device

• Supports lithium, AGM, gel, and flooded batteries

• Protection against reverse polarity, short circuit, and over-temperature

RDA Solutions is an authorized Victron Energy distributor. Contact us today to request a quote.

MPN: SCC125070221 (250/70-Tr)

Spec Sheet

The Victron SmartSolar MPPT 250/70 is a 70A solar charge controller for 12, 24, 36, and 48V systems. It’s built for larger off-grid power sites that need up to 250V PV input.

• Ultra-fast MPPT tracking, up to 99% efficiency, no cooling fan

• Up to 250V PV input; auto-selects 12, 24, or 48V (36V set manually)

• Built-in Bluetooth for setup and monitoring through the VictronConnect app

• VE.Direct port for remote monitoring through a Victron GX device

• Programmable alarm relay and remote on/off terminal

• Sync up to 10 units over Bluetooth for larger arrays

• Supports lithium, AGM, gel, and flooded batteries

RDA Solutions is an authorized Victron Energy distributor. Contact us today to request a quote.

MPN: SCC125110412

Spec Sheet

The Victron SmartSolar MPPT 250/100-Tr VE.Can is a 100A solar charge controller for 12, 24, 36, and 48V systems, built for large off-grid power sites with up to 250V of PV input.

• Ultra-fast MPPT tracking, up to 99% efficiency, no cooling fan

• Up to 250V PV input; auto-selects 12, 24, or 48V (36V set manually)

• Built-in Bluetooth for setup and monitoring through the VictronConnect app

• VE.Can and VE.Direct ports for remote monitoring through a Victron GX device

• Sync up to 25 units over VE.Can for larger arrays

• Programmable alarm relay and remote on/off terminal

• Supports lithium, AGM, gel, and flooded batteries

RDA Solutions is an authorized Victron Energy distributor. Contact us today to request a quote.

MPN: PMP122305100

Spec Sheet

The Victron MultiPlus-II 12/3000/120-50 2x120V is a 3000VA inverter/charger for 12V battery systems on North American 120/240V split-phase power. It’s built for off-grid sites, backup power, and generator-supported systems.

• 3000VA pure sine wave inverter with a 120A battery charger

• Accepts 120/240V split-phase or 120V single-phase input, with a 50A transfer switch

• Switches over in under 18 ms on L1 to keep electronics running

• PowerControl and PowerAssist prevent generator overload and boost limited supply with battery power

• Programmable relay for alarms or generator start/stop

• Run up to 6 units in parallel for more capacity

• Remote monitoring through a Victron GX device and VRM

• Operates from -40°F to 150°F

• Supports lithium and lead-acid batteries

MPN: SHU050150050

Spec Sheet

The Victron SmartShunt 500A is a Bluetooth battery monitor for 6.5–70V systems. It tracks state of charge, time remaining, voltage, current, and amp hours, and shows everything on your phone instead of a separate display.

• Built-in Bluetooth for live data in the VictronConnect app

• VE.Direct port for remote monitoring through a Victron GX device

• Auxiliary input for a second battery, bank midpoint, or temperature sensor

• Shares battery data with Victron chargers for more accurate charging

• Works with lithium, AGM, gel, and flooded batteries

• Compact design with minimal wiring

RDA Solutions is an authorized Victron Energy distributor. Contact us today to request a quote.