Morningstar Accessories
MPN: MS-EMC-1
The Ethernet MeterBus Converter™ provides the data and communications connection for Morningstar devices, between themselves, with surrounding systems, and with the outside environment through the internet. It’s simple to connect to Morningstar products equipped with an RJ-11 Meterbus port to enable remote monitoring, and custom programming.
Supported Protocols and technologies:
HTTP for LiveView: a simple and straightforward web dashboard for checking system status easily from any device browser
SNMP (Simple Network Management Protocol): provides more detailed monitoring of all system data with existing IT management architecture
MODBUS Industrial Control: provides high-speed monitoring and control for industrial equipment Compatible Morningstar products include:
MPPT controllers: TriStar MPPT, ProStar MPPT, and SunSaver MPPT
PWM controllers: TriStar, ProStar (Gen3) and SunSaver Duo
Inverters: SureSine
MPN: MS-GFPD-150V, MS-GFPD-600V
Morningstar Models: GFPD-150V, GFPD-600V
Morningstar’s Ground Fault Protection Device™ (GFPD) prevents current from following any unintended paths during a ground fault. Other ground fault detection/interruption products break the bond to the grounded conductor. When this occurs, not only is the earth bond compromised, but the battery and DC loads can also be left ungrounded and floating.
For a negatively grounded system this means that the negative side of the battery and loads can float to negative Voc in relation to ground and the positive side can float to (negative Voc + Vbat). Morningstar’s GFPD better isolates the array from the battery and loads, while maintaining the bond to ground.
Compatible with:
TriStar MPPT 600V
TriStar MPPT
ProStar MPPT
MPN: MS-HUB-1
The MeterHub™ allows up to 15 Morningstar products on a single MeterBus network. The product electrically isolates devices that supply power to the network, preventing damage to the network in the event of grounding problems. Five status LEDs indicate the proper network connection to each port.
In multi-controller systems the TS-M-2, TS-M-2-600V and TS-RM-2 are networkable using Morningstar’s MeterHub to allow individual controller data and aggregate system data to be displayed together on a single meter.
The MeterHub is suitable for either wall or DIN rail mounting. Compatible with:
TriStar MPPT 600V Controller
TriStar MPPT Controller
ProStar MPPT Controller
SunSaver MPPT Controller
TriStar Controller
TriStar Meter 2
TriStar Remote Meter 2
Relay Driver
MPN: MS-MRC-1
Morningstar recently launched a new Meterbus to EIA-485 Adapter (MRC-1). The Meterbus-485 Adapter (Model: MRC-1), with RJ-11 cable included, converts the Morningstar MeterBus RJ-11 electrical interface to a standard EIA-485 interface. This allows Morningstar controllers or inverters with a MeterbusTM port, but without an EIA-485 communications port, to network with Morningstar EIA-485 devices like the GenStar MPPT and TriStar MPPT controllers. The MRC-1 can also be used for EIA-485 communications with any 3rd party hardware that supports Modbus communication. This accessory features the following benefits:
Protection against reverse polarity at its EIA-485 power terminals
Support for a four wire EIA-485 bus: GND, Data A, Data B, and Power
Supplies isolated power to an EIA-485 network, eliminating the need to an external bus power source in many cases
Five year limited warranty
The MRC-1 is compatible with ProStar MPPT and PWM controllers, SunSaver MPPT controller, SunSaver Duo Controller, and SureSine Classic inverter.
MPN: MS-PS-MPPT-WB
An optional two-piece enclosure accessory for ProStar MPPT. Provides effective cover for wires and conduit leading to and from the ProStar MPPT controller. This Wire Box may be required or recommended by authorities having jurisdiction to reduce hazards associated with exposed wires, conduits and connections.
MPN: MS-RD-1
The Relay Driver™ is a 4 channel logic module which provides high-level system control functions such as load control, generator start and alarm signaling. The four channels can be utilized as analog inputs or as relay driver outputs. The Relay Driver can operate in stand-alone mode or by reading meterbus data from other Morningstar products and it can be set up for advanced functionality with MSview.
Relay Driver Features
4 channels: Each configurable as an Analog Input or Relay Driver Output
Standalone operation for battery or analog input voltage control or temperature control.
Expandable: Use 2 units and read and react on the others data
Reads MeterBusTM data from supported Morningstar controllers, inverters or Relay Drivers for logic control
Monitor battery and channel voltages, faults and alarms and ambient temperature
Control Relay Driver outputs directly by Modbus commands via RS-232 for use with PLC’s and other industrial hardware.
Multiwire Generator Start/ Stop Control
MPN: MS-RM-1
Morningstar’s Remote Meter™ (RM-1) is a universal, four digit display with custom icons that is compatible with several Morningstar controllers and inverters. This meter provides comprehensive system information for easy monitoring including voltage, current and temperature.
Compatible With:
ProStar (Gen3)
SunSaver Duo controller
ProStar MPPT controller
SunSaver MPPT controller
SureSine inverter
MPN: MS-RSC-1
By converting to EIA-485, the RSC-1 allows up to 128 Morningstar products to communicate on the same communication bus and over much greater distances.
MPN: MS-RTS
Morningstar’s Remote Temperature Sensor™ (RTS) provides improved battery charging in solar systems that experience temperature variations during the year. The RTS measures temperature at the battery and the controller uses this data for very accurate temperature compensation. Use of the RTS is recommended whenever the temperature at the battery will be more than 5°C (9°F) different than the temperature at the controller. The TriStar has no on-board temperature compensation; therefore the use of the RTS is required for temperature compensated charging. Other Morningstar controllers will default to an on-board temperature sensor if a RTS is not connected. The RTS is compatible with the following Morningstar controllers:
TriStar, TriStar MPPT, TriStar MPPT 600V
ProStar and Prostar MPPT
Sunsaver MPPT
EcoBoost MPPT
SunKeeper
SunSaver Duo
EcoPulse
*Remote Temperature Sensors included with all TriStar MPPT units.
MPN: MS-TS-M-2
The meter will display a great deal of information about the TriStar controller and the operation of your system. In addition, the meter enables manual functions and controller diagnostics.
MPN: MS-TS-M-2-600V
On-Board Advanced Digital Display for the TriStar MPPT 600V Controller. Displays extensive system and controller information, logged data, bar graph metering, as well as alarms and faults for easy troubleshooting. The information may be shown in English, French, German, Portuguêse or Spanish languages.
MPN: MS-TS-RM-2
Remote Digital Display for the TriStar Family Controllers. The TS-RM-2 provides the same data display as the TS-M-2, except that it ships with 30 meters of cable and a flat faceplate. These features enable convenient mounting away from the controller. The meter enables manual functions and controller diagnostics. These capabilities will increase your confidence that the system is working properly and will help you to improve system reliability, battery life, and system performance.
MPN: MS-UMC-1
The USB MeterBus Adapter™ (model: UMC-1) converts the Morningstar MeterBus RJ-11 electrical interface to a standard USB 2.0 interface which allows communication between a PC and a Morningstar charge controller or inverter. The UMC-1 may be used with any Morningstar controller or inverter equipped with a meter connection that does not also already have a RS-232 port. Compatible Morningstar products include:
ProStar MPPT
Sunsaver MPPT
ProStar (Gen3)
SunSaver DUO
SureSine
MPPT technology
(Maximum Power Point Tracking)
PWM technology
(Pulse-Width Modulation)
Can convert all the solar electricity voltage possible into useable electricity. MPPT's maximum conversion efficiency is ideal for areas where seasonal, weather and shading conditions cause wide variations in solar “harvesting.” Because of additional circuitry, MPPT is more complex and expensive. Morningstar TrackStar™ MPPT technology is the industry’s reference standard
Used in places with consistent sunlight, minimal shading and no physical space limitations—such as at the top of light poles, for example. PWM controllers are simpler and more cost effective, ideal for use in systems where extracting every last watt of electricity possible from a PV array is not a concern
ProStar MPPT Solar Charge Controllers
MPN: MS-PS-MPPT-25
ProStar MPPT 25 amp (12/24V)
Contact us today to request a quote.
Prostar MPPT™ solar charge controller is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 1100 watts. All versions include load control and TrakStar™ Technology to maximize PV efficiency and energy harvest.
The ProStar design has been proven in over two decades of use in the world’s most demanding installations—and ProStar today reflects Morningstar’s policy of continuous improvement through regular upgrades and enhancements. Because Morningstar’s employee-owned culture never “rests on success,” ProStar customers can own both a legend and the latest in a single product.
MPN: MS-PS-MPPT-25M
ProStar MPPT 25 amp with Meter (12/24V)
Contact us today to request a quote.
Prostar MPPT™ solar charge controller is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 1100 watts. All versions include load control and TrakStar™ Technology to maximize PV efficiency and energy harvest.
The ProStar design has been proven in over two decades of use in the world’s most demanding installations—and ProStar today reflects Morningstar’s policy of continuous improvement through regular upgrades and enhancements. Because Morningstar’s employee-owned culture never “rests on success,” ProStar customers can own both a legend and the latest in a single product.
MPN: MS-PS-MPPT-40
ProStar MPPT 40 amp (12/24V)
Contact us today to request a quote.
Prostar MPPT™ solar charge controller is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 1100 watts. All versions include load control and TrakStar™ Technology to maximize PV efficiency and energy harvest.
The ProStar design has been proven in over two decades of use in the world’s most demanding installations—and ProStar today reflects Morningstar’s policy of continuous improvement through regular upgrades and enhancements. Because Morningstar’s employee-owned culture never “rests on success,” ProStar customers can own both a legend and the latest in a single product.
MPN: MS-PS-MPPT-40M
ProStar MPPT 40 amp with Meter (12/24V)
Contact us today to request a quote.
Prostar MPPT™ solar charge controller is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 1100 watts. All versions include load control and TrakStar™ Technology to maximize PV efficiency and energy harvest.
The ProStar design has been proven in over two decades of use in the world’s most demanding installations—and ProStar today reflects Morningstar’s policy of continuous improvement through regular upgrades and enhancements. Because Morningstar’s employee-owned culture never “rests on success,” ProStar customers can own both a legend and the latest in a single product.
ProStar PWM Solar Charge Controllers
MPN: MS-PS-15
ProStar-15 amp (12/24V)
Contact us today to request a quote.
The ProStar solar charge controller has been the leading mid-range pulse width modulation (PWM) controller since 1995. With over 350,000 units installed in the harshest environments in over 100 countries, ProStar sets the standards in performance and reliability for the rest of the solar industry.
The Generation 3 ProStar shares the outstanding build quality and familiar form factor of its predecessors and adds data and lighting control capabilities, a graphical interface, and advanced protection features that meet the needs of today’s most demanding off-grid solar applications. ProStar provides both “the legend and the latest” in a single new product.
MPN: MS-PS-15M
Prostar-15 amp with meter (12/24V)
Contact us today to request a quote.
The ProStar solar charge controller has been the leading mid-range pulse width modulation (PWM) controller since 1995. With over 350,000 units installed in the harshest environments in over 100 countries, ProStar sets the standards in performance and reliability for the rest of the solar industry.
The Generation 3 ProStar shares the outstanding build quality and familiar form factor of its predecessors and adds data and lighting control capabilities, a graphical interface, and advanced protection features that meet the needs of today’s most demanding off-grid solar applications. ProStar provides both “the legend and the latest” in a single new product.
MPN: MS-PS-30
ProStar-30 amp (12/24V)
Contact us today to request a quote.
The ProStar solar charge controller has been the leading mid-range pulse width modulation (PWM) controller since 1995. With over 350,000 units installed in the harshest environments in over 100 countries, ProStar sets the standards in performance and reliability for the rest of the solar industry.
The Generation 3 ProStar shares the outstanding build quality and familiar form factor of its predecessors and adds data and lighting control capabilities, a graphical interface, and advanced protection features that meet the needs of today’s most demanding off-grid solar applications. ProStar provides both “the legend and the latest” in a single new product.
MPN: MS-PS-30M
Prostar-30 amp with meter (12/24V)
Contact us today to request a quote.
The ProStar solar charge controller has been the leading mid-range pulse width modulation (PWM) controller since 1995. With over 350,000 units installed in the harshest environments in over 100 countries, ProStar sets the standards in performance and reliability for the rest of the solar industry.
The Generation 3 ProStar shares the outstanding build quality and familiar form factor of its predecessors and adds data and lighting control capabilities, a graphical interface, and advanced protection features that meet the needs of today’s most demanding off-grid solar applications. ProStar provides both “the legend and the latest” in a single new product.
SunSaver MPPT Solar Charge Controllers
MPN: MS-SS-MPPT-15L
SunSaver MPPT 15 amp (12/24V)
The Sun Saver MPPT-15L delivers industry-leading 97.5% efficiency with advanced TrakStar™ Maximum Power Point Tracking technology that extracts every available watt from your solar panels. Rated for 15A with support for systems up to 520W, it works with 12V or 24V batteries and high-voltage solar modules up to 60V for maximum design flexibility. This Professional Series controller supports Lead-Acid, Lithium, and NiCd batteries while providing comprehensive protection against shorts, over-current, and reverse polarity. Proven in extreme conditions from -40°C to +60°C and approved for Class 1 Division 2 Hazardous Locations, it's trusted by professionals worldwide in mission-critical applications. With full ETL, CE, IEC, TAA, and FCC certifications plus a 5-year warranty, you're getting Morningstar's legendary reliability.
Contact us today to request a quote.
SunSaver PWM Solar Charge Controllers
MPN: MS-SS-6-12V
Contact us today to request a quote.
Since the introduction in 1996, more than 1.5 million SunSaver Controllers have set the standard for reliability and performance in demanding oilfield and mining installations in nearly 90 countries around the globe. Today, SunSaver is the world’s leading small solar controller for industrial and consumer markets, proven in mission critical applications where failure is simply not an option.
This third generation SunSaver brings over two decades of advances in software and electronics to the same rugged, hardened design that made the original famous. Own both a legend and the latest in a single product.
MPN: MS-SS-6L-12V
Contact us today to request a quote.
Since the introduction in 1996, more than 1.5 million SunSaver Controllers have set the standard for reliability and performance in demanding oilfield and mining installations in nearly 90 countries around the globe. Today, SunSaver is the world’s leading small solar controller for industrial and consumer markets, proven in mission critical applications where failure is simply not an option.
This third generation SunSaver brings over two decades of advances in software and electronics to the same rugged, hardened design that made the original famous. Own both a legend and the latest in a single product.
MPN: MS-SS-10-12V
Contact us today to request a quote.
Since the introduction in 1996, more than 1.5 million SunSaver Controllers have set the standard for reliability and performance in demanding oilfield and mining installations in nearly 90 countries around the globe. Today, SunSaver is the world’s leading small solar controller for industrial and consumer markets, proven in mission critical applications where failure is simply not an option.
This third generation SunSaver brings over two decades of advances in software and electronics to the same rugged, hardened design that made the original famous. Own both a legend and the latest in a single product.
MPN: MS-SS-10L-12V
Contact us today to request a quote.
Since the introduction in 1996, more than 1.5 million SunSaver Controllers have set the standard for reliability and performance in demanding oilfield and mining installations in nearly 90 countries around the globe. Today, SunSaver is the world’s leading small solar controller for industrial and consumer markets, proven in mission critical applications where failure is simply not an option.
This third generation SunSaver brings over two decades of advances in software and electronics to the same rugged, hardened design that made the original famous. Own both a legend and the latest in a single product.
MPN: MS-SS-10L-24V
Contact us today to request a quote.
Since the introduction in 1996, more than 1.5 million SunSaver Controllers have set the standard for reliability and performance in demanding oilfield and mining installations in nearly 90 countries around the globe. Today, SunSaver is the world’s leading small solar controller for industrial and consumer markets, proven in mission critical applications where failure is simply not an option.
This third generation SunSaver brings over two decades of advances in software and electronics to the same rugged, hardened design that made the original famous. Own both a legend and the latest in a single product.
MPN: MS-SS-20L-12V
Contact us today to request a quote.
Since the introduction in 1996, more than 1.5 million SunSaver Controllers have set the standard for reliability and performance in demanding oilfield and mining installations in nearly 90 countries around the globe. Today, SunSaver is the world’s leading small solar controller for industrial and consumer markets, proven in mission critical applications where failure is simply not an option.
This third generation SunSaver brings over two decades of advances in software and electronics to the same rugged, hardened design that made the original famous. Own both a legend and the latest in a single product.
MPN: MS-SS-20L-24V
Contact us today to request a quote.
Since the introduction in 1996, more than 1.5 million SunSaver Controllers have set the standard for reliability and performance in demanding oilfield and mining installations in nearly 90 countries around the globe. Today, SunSaver is the world’s leading small solar controller for industrial and consumer markets, proven in mission critical applications where failure is simply not an option.
This third generation SunSaver brings over two decades of advances in software and electronics to the same rugged, hardened design that made the original famous. Own both a legend and the latest in a single product.
SunSaver Duo PWM Solar Charge Controllers
MPN: MS-SSD-25
Morningstar’s SunSaver Duo™ is an advanced PWM two battery controller for RV’s, caravans, boats and cottages. This product will charge two separate and isolated batteries at the same time, such as a “house” and an engine battery, based on user selectable priorities. The SunSaver Duo employs Morningstar’s legendary SunSaver controller technology, whose long-term track record for high reliability and improved battery charging is well-recognized in the solar industry.
MPN: MS-SSD-25RM
Morningstar’s SunSaver Duo™ is an advanced PWM two battery controller for RV’s, caravans, boats and cottages. This product will charge two separate and isolated batteries at the same time, such as a “house” and an engine battery, based on user selectable priorities. The SunSaver Duo employs Morningstar’s legendary SunSaver controller technology, whose long-term track record for high reliability and improved battery charging is well-recognized in the solar industry.
An optional backlit remote meter can be purchased with this controller, and mounted in or on a wall, to display digital and pictorial status information about the solar power system. The SunSaver Duo is epoxy encapsulated for environmental protection, is user adjustable via DIP switch or connection to a personal computer, and has an optional remote temperature sensor.
TriStar MPPT Solar Charge Controllers
MPN: MS-TS-MPPT-30
Contact us today to request a quote.
The industry-leading TriStar MPPT™ with TrakStar Technology is an advanced maximum power point tracking controller for larger off-grid photovoltaic (PV) energy systems up to 3kWp. An iconic design, TriStars have been proven in solar installations around the globe and remain the first choice for designers of mission-critical systems where failure is not an option.
MPN: MS-TS-MPPT-45
Contact us today to request a quote.
The industry-leading TriStar MPPT™ with TrakStar Technology is an advanced maximum power point tracking controller for larger off-grid photovoltaic (PV) energy systems up to 3kWp. An iconic design, TriStars have been proven in solar installations around the globe and remain the first choice for designers of mission-critical systems where failure is not an option.
MPN: MS-TS-MPPT-60
Contact us today to request a quote.
The industry-leading TriStar MPPT™ with TrakStar Technology is an advanced maximum power point tracking controller for larger off-grid photovoltaic (PV) energy systems up to 3kWp. An iconic design, TriStars have been proven in solar installations around the globe and remain the first choice for designers of mission-critical systems where failure is not an option.
MPN: MS-TS-MPPT-60M
Contact us today to request a quote.
The industry-leading TriStar MPPT™ with TrakStar Technology is an advanced maximum power point tracking controller for larger off-grid photovoltaic (PV) energy systems up to 3kWp. An iconic design, TriStars have been proven in solar installations around the globe and remain the first choice for designers of mission-critical systems where failure is not an option.
MPN: MS-TS-MPPT-60-600V-48-DB
TriStar MPPT-60 amp, 600V DC. for 48V Battery
Contact us today to request a quote.
The TriStar MPPT 600V™ is a breakthrough in charge controller design. By accepting PV array input up to 600 Voc, it enables installers to design systems with longer, fewer strings, reducing cabling and hardware which make installation and wiring easier and faster. Morningstar’s advanced digital engineering combined with superior thermal management make the TS-MPPT-600V with TrakStar technology the only charge controller in its class that doesn’t require a cooling fan or fans, making it both extremely reliable and efficient (with 97.9% peak efficiency). Ideal for DC-coupled energy storage applications. Available in four versions:
TS-MPPT-60-600V-48: Standard
TS-MPPT-60-600V-48-DB: with Disconnect Box
TS-MPPT-60-600V-48-DB-TR: with DC Transfer Switch
TS-MPPT-60-600V-48-DB-TR-GFPD: Pre-wired with Ground Fault
Protection Device
MPN: TS-MPPT-60-600V-48-DB
TriStar MPPT-60 amp, 600V DC, for 48V Battery , with Grounded Disconnect Box
Contact us today to request a quote.
The TriStar MPPT 600V™ is a breakthrough in charge controller design. By accepting PV array input up to 600 Voc, it enables installers to design systems with longer, fewer strings, reducing cabling and hardware which make installation and wiring easier and faster. Morningstar’s advanced digital engineering combined with superior thermal management make the TS-MPPT-600V with TrakStar technology the only charge controller in its class that doesn’t require a cooling fan or fans, making it both extremely reliable and efficient (with 97.9% peak efficiency). Ideal for DC-coupled energy storage applications. Available in four versions:
TS-MPPT-60-600V-48: Standard
TS-MPPT-60-600V-48-DB: with Disconnect Box
TS-MPPT-60-600V-48-DB-TR: with DC Transfer Switch
TS-MPPT-60-600V-48-DB-TR-GFPD: Pre-wired with Ground Fault
Protection Device
TriStar PWM Solar Charge Controllers
MPN: MS-TS-45
TriStar-45 amp (12/24/48V)
Contact us today to request a quote.
The TriStar™ is a three-function PWM controller for larger systems, providing reliable PWM solar battery charging or load control or diversion regulation. The controller operates in one of these modes at a time and two or more controllers may be used to provide multiple functions. The TriStar uses advanced technology and automated production to provide exciting new features at a competitive cost to regulate battery charging in home systems and professional applications. The 60 amp version is also available with a factory installed meter.
MPN: MS-TS-60
TriStar-60 amp (12/24/48V)
Contact us today to request a quote.
The TriStar™ is a three-function PWM controller for larger systems, providing reliable PWM solar battery charging or load control or diversion regulation. The controller operates in one of these modes at a time and two or more controllers may be used to provide multiple functions. The TriStar uses advanced technology and automated production to provide exciting new features at a competitive cost to regulate battery charging in home systems and professional applications. The 60 amp version is also available with a factory installed meter.
MPN: MS-TS-60M
The TriStar™ is a three-function PWM controller for larger systems, providing reliable PWM solar battery charging or load control or diversion regulation. The controller operates in one of these modes at a time and two or more controllers may be used to provide multiple functions. The TriStar uses advanced technology and automated production to provide exciting new features at a competitive cost to regulate battery charging in home systems and professional applications. The 60 amp version is also available with a factory installed meter.
Contact us today to request a quote.
GenStar MPPT Solar Charge Controllers
Models: MS-GS-MPPT-60M-200V, MS-GS-MPPT-80M-200V, MS-GS-MPPT-100M-200V
GenStar-MPPT Solar Charge Controller with Load Control and Integrated System Control-includes RTS and Meter
The revolutionary GenStar MPPT represents Morningstar’s best engineering efforts brought together in a single design, with full, advanced communications and control features built-in–plus the ability to add more technology to any system through our innovative ReadyRail expansion technology.
The GenStar MPPT is available in 60, 80, and 100A charge ratings with a maximum Voc limit of 200V, and support for 12, 24, 36, and 48V lead acid/lithium/NiCd/other batteries. Custom settings programming is required for Lithium, NiCd, and other battery chemistries.
SunGuard PWM Solar Charge Controllers
MPN: MS-SG-4
The SunGuard™ is a single module, compact PWM solar charge controller for small systems, ideal for both professional and consumer use. With SunGuard, there’s no reason not to insist on Morningstar quality with any system design no matter how small.
Contact us today to request a quote.
SunKeeper PWM Solar Charge Controllers
MPN: MS-SK-6
6 amp (12V)
SunKeeper™ solar controller provides a low cost regulated output directly from the solar module to maximize battery life in small solar power applications. The SunKeeper is epoxy encapsulated and rated for outdoor use. By mounting directly to the module junction box and wiring through the junction box knockout, the connection is weather-proof. This eliminates the need for an additional housing for the controller.
MPN: MS-SK-12
12 amp (12V)
SunKeeper™ solar controller provides a low cost regulated output directly from the solar module to maximize battery life in small solar power applications. The SunKeeper is epoxy encapsulated and rated for outdoor use. By mounting directly to the module junction box and wiring through the junction box knockout, the connection is weather-proof. This eliminates the need for an additional housing for the controller.
SunLight PWM Solar Charge Controllers
MPN: MS-SL-10L-12V, MS-SL-10L-24V, MS-SL-20L-12V, MS-SL-20L-24V
The SunLight™ solar charge controller is World’s leading solar lighting controller for street and pathway lighting, parking areas, bus stations, signage, and much more. This unit is based off of our reliable epoxy coated SunSaver design and the addition of a microcontroller for automatic lighting control functions.
Models: SL-10L-12V, SL-10L-24V, SL-20L-12V, SL-20L-24V
ReadyRail Expansion System
MPN: MS-RB-Shunt
ReadyShunt is a battery meter and DC current sensor that provides visibility to critical battery information including SOC (state-of-charge) and other key metrics essential to battery and off-grid system health. It supports lead acid, lithium, and other battery chemistries. ReadyShunt easily snaps into a ReadyRail-equipped Morningstar product. After following operating manual instructions to connect your battery, the ReadyShunt is recognized and activated.
*Shunts sold separately* A snap-in ReadyBlock enabling intelligent battery monitoring including SOC calculation and energy in/out (Amp hours). Can also be used for current measurement of system sources, loads and more. Features two current measurement channels.
Part of the ReadyBlock suite of add-on– yet built-in– functionality available in Morningstar “host” components featuring the ReadyRail expansion system.
“Add-on” in the sense that ReadyBlocks can be integrated into a system at any time, either on inception or later as needs arise
“Built-in” because once added, ReadyBlocks become part of the host component, seamless integrated into both its hardware and software
MPN: MS-RB-BMS
ReadyBMS builds “lithium DNA” into any system equipped with a Morningstar Integrated Series parent component equipped with ReadyRail/ReadyBlock expansion technology. It delivers true closed-loop control and communications with the Tier 2 lithium battery brands in Morningstar’s Energy Storage Partner program, delivering total peace of mind with charger and battery working together in a system.
Currently supports two-way closed-loop / Tier 2 communication and operation with Discover and PylonTech LiFePO4 batteries. Check the Morningstar ESP webpage for more information and updates as Morningstar brings in additional closed loop communication battery partners.
Part of the ReadyBlock suite of add-on– yet built-in– functionality available in Morningstar “host” components featuring the ReadyRail expansion system.
“Add-on” in the sense that ReadyBlocks can be integrated into a system at any time, either on inception or later as needs arise
“Built-in” because once added, ReadyBlocks become part of the host component, seamless integrated into both its hardware and software
MPN: MS-RB-Relay
The Relay Driver™ is a 4 channel logic module which provides high-level system control functions such as load control, generator start and alarm signaling. The four channels can be utilized as analog inputs or as relay driver outputs. The Relay Driver can operate in stand-alone mode or by reading meterbus data from other Morningstar products and it can be set up for advanced functionality with MSview.
Relay Driver Features
4 channels: Each configurable as an Analog Input or Relay Driver Output
Standalone operation for battery or analog input voltage control or temperature control.
Expandable: Use 2 units and read and react on the others data
Reads MeterBusTM data from supported Morningstar controllers, inverters or Relay Drivers for logic control
Monitor battery and channel voltages, faults and alarms and ambient temperature
Control Relay Driver outputs directly by Modbus commands via RS-232 for use with PLC’s and other industrial hardware.
Multiwire Generator Start/ Stop Control
SureSine Inverters
The new SureSine off-grid inverter line is comprised of six new power output classes from 150-2,500W with 120 or 230V output and 12, 24 or 48V DC input options to cover a wide range of off-grid applications requiring a high-performance, industrial-grade, pure sine wave inverter
This new SureSine line has:
Wireless Android and iOS utility apps for set-up and monitoring with remote devices, plus Bluetooth communications
Multiple AC hardwire remote terminal options on selected models
Industry leading safety, low-noise and high performance NRTL certifications for reliability and system conformance
SureSine line uses industrial-grade build quality throughout, with models built around premium toroidal transformers for improved sinewave stability. Designed for the most demanding off-grid mission-critical installations.
The new SureSine off-grid inverter line is comprised of six new power output classes from 150-2,500W with 120 or 230V output and 12, 24 or 48V DC input options to cover a wide range of off-grid applications requiring a high-performance, industrial-grade, pure sine wave inverter
This new SureSine line has:
Wireless Android and iOS utility apps for set-up and monitoring with remote devices, plus Bluetooth communications
Multiple AC hardwire remote terminal options on selected models
Industry leading safety, low-noise and high performance NRTL certifications for reliability and system conformance
SureSine line uses industrial-grade build quality throughout, with models built around premium toroidal transformers for improved sinewave stability. Designed for the most demanding off-grid mission-critical installations.
The new SureSine off-grid inverter line is comprised of six new power output classes from 150-2,500W with 120 or 230V output and 12, 24 or 48V DC input options to cover a wide range of off-grid applications requiring a high-performance, industrial-grade, pure sine wave inverter
This new SureSine line has:
Wireless Android and iOS utility apps for set-up and monitoring with remote devices, plus Bluetooth communications
Multiple AC hardwire remote terminal options on selected models
Industry leading safety, low-noise and high performance NRTL certifications for reliability and system conformance
SureSine line uses industrial-grade build quality throughout, with models built around premium toroidal transformers for improved sinewave stability. Designed for the most demanding off-grid mission-critical installations.
The new SureSine off-grid inverter line is comprised of six new power output classes from 150-2,500W with 120 or 230V output and 12, 24 or 48V DC input options to cover a wide range of off-grid applications requiring a high-performance, industrial-grade, pure sine wave inverter
This new SureSine line has:
Wireless Android and iOS utility apps for set-up and monitoring with remote devices, plus Bluetooth communications
Multiple AC hardwire remote terminal options on selected models
Industry leading safety, low-noise and high performance NRTL certifications for reliability and system conformance
SureSine line uses industrial-grade build quality throughout, with models built around premium toroidal transformers for improved sinewave stability. Designed for the most demanding off-grid mission-critical installations.
MPN: MS-SI-300-115V-UL and MS-SI-300-220V
Compact, powerful and proven in demanding rural electrification and other demanding projects around the globe, the SureSine Classic inverter is the right tool for DC to AC power conversion in small residential, mobile and recreational, and light industrial applications where environmental extremes are a consideration. A cast, anodized aluminum enclosure and encapsulated circuitry—plus an effectively sealed, fanless design– ensure long-term, dependable operation under the harshest conditions.
MPN: MS-DIN-1
Spec Sheet
These rugged plastic clips have been custom made to match the mounting holes on the SunSaver controllers and to either snap on to the middle of the rail or to slide on from the end of the rail. The clips also provide a mechanism to allow easy removal of the controller from the DIN rail without removing the clips.
The DIN Rail Clips (DIN-1) are compatible with the following Morningstar solar controllers:
SunSaver
SunLight
SunSaver Duo
SunSaver MPPT